A refrigerated transport and pay attention to what was laid

a lot of places with no air-conditioner manufacturers, freezers purchase must be through the logistics transportation over a long distance, then in the transport process we should pay attention to what issues? And after the transportation to the destination, freezers how to place, these are a lot of influence on air-conditioner work normally. Below and freezers prices take a look at this knowledge. Freezers handling precautions: should lift foot, can't catch in the door handle or applying pressure on the mesa and condenser, more can't drag on the ground. Otherwise it will damage the compressor or make a compressor refrigeration oil into the pipe cooling, refrigeration, and easy to cause the compressor off spring. Cabinet put oneself in another's biggest Angle cannot be more than 45 degrees, more cannot be inverted or horizontal. To prevent knock against and violent vibration, to prevent the rain water in the process of transportation. So basically, can guarantee the freezers in the process of transportation safety, not because of improper operation, lead to can't normal use after reaching my destination. And then to the destination after put freezer notice: from the sun, shall be placed away from heat source. Due to the need of work for heat exchange with the outside world, both through the condenser cooling to the world and the external environment temperature is higher, the slower cooling, it will make the longer of air-conditioner, increase power consumption, refrigeration effect is poor. Because both of air-conditioner shell, compressor and condenser are metal materials, if the humidity is too big, can make these parts rust, shorten the service life of the commercial freezer. Wet hot environment at the same time, will cause condensation, freezers appearance affect electrical performance. Placed in a well-ventilated place or not too close against the wall, or bad for heat dissipation will affect the cooling effect. Should be laid flat on solid ground. And can make the compressor works smoothly, reduce vibration and noise. Should not be placed in low temperature. Because temperature is too low. Make the commercial freezer freezer refrigeration is poor, unable to overcome.
Maintaining industrial refrigerator is not as easy as it may seem. You have to do plenty of important tasks. So cruel is the truth unless you've got a to help you.
Ningbo Jingeao Electronics Co., Ltd’s core aim is to afford high-quality products with the concept of manufacturing technology.
If something seems too good to be true, then it can be a , which provides commercial refrigerator value over its cost.